Analytica GmbH AnaGate CAN duo Manual do Utilizador descarregar pdf (Página 14)

2 Configuration

2.1 Initial installation

First the AnaGate CAN Gateway must be supplied via one of the two power plugs with a

tension from 9 to 24 V. Also keep it away from direct sunlight.

Insert the LAN cable into the plug labelled LAN and connect it either to a hub or switch, or

directly to the PC using a crossover cable.

The AnaGate CAN Gateway is delivered with the following settings:

 Type of address: Static

 IP address: 192.168.1.254

 Network mask: 255.255.255.0

 Gateway: 192.168.1.1

The device can now be configured using a standard browser (Internet Explorer, Mozilla, etc.)

by using http://192.168.1.254.

Chart 2-1: Browser interface (AnaGate CAN duo)

The PC used for the configuration must be in the 192.168.1.x network. The static IP address

192.168.1.2 with the subnet mask 255.255.255.0 can be e.g. used.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 26 27

Sem comentários

Analytica GmbH AnaGate CAN duo Manual do Utilizador Página 14